LED screws 12 V or 24 V
in different colors

(Color and number, please volt upper right)

These are extremely bright LED to screw in chromed steel housing with fine thread M8.
The screws are supplied ready for connection. They are suitable for indoor as well as for
the outdoor use.

     5mm LED with 12,000 mcd
     wired with 30cm cable
     M8 fine threaded nut and locking ring included
     Lens: Clear, water-clear
     Angle 25 ° + / - 5 °
     Wavelength 460-470nm
     impact-resistant
     water-resistant
     indoor and outdoor

Applications: modeling; car and truck tuning, lighting inside and outside DECORATION

Useful information about the product:

     Never look directly into the LED's, because it can cause severe retinal damage
     ! come

     All LED screws are provided with a resistance, ie you can
     be mounted directly to a power source.
     (Direct current, the source must be a + and -) have
     Attention! The LED screws, only in the voltage range
     operate, how they were designed. 12 V or 24 V
     The LED screws have a positive input and negative output
     They have to be well connected Sun
     (Positive input = black / white wire / minus output = black cable)

     There are two possible settings:

     Series connection and parallel connection
     Because the screws and amenity with a resistor,
     advisable in this case, a parallel circuit.
     The parallel circuit has a distinct advantage
     with respect to the series circuit, if one of the LED screws
     burns out, then light up on the other.
     (See diagram)